Selection of Sediment Transport Relations Part III: Numerical Ranking of Sediment Transport Relations
The emphasis of this paper is the methodology for the selection of sediment transport relations and is applicable for analysis of any sediment transport relation. However, to illustrate...

Field Measurements of Streambed Scour at Bridge Piers in Ohio
Field measurements made from 1989 to 1994 were evaluated to characterize pier scour at 21 bridge sites in Ohio. Pier scour was observed at sites in 45 of 47 real-time scour measurements....

Protecting Dredged Material Containment Levees along the Houston Ship Channel
This paper describes the background, selection, installation, and performance of the three-dimensional woven geotextile used for erosion protection along 122 meters (400 feet) of levee...

How to Manage Floodwaves in the Dutch Meuse: Future Measures to Reduce the Inconvenience of Inundations
This study showed that in the Gravelmeuse the combination of nature development and reducing of inundation inconvenience is possible. In the framework of the obliged supply of a fixed...

Channel Scour Protection at Roadway Crossings
There are several forms of channel scour which may damage a bridge or culvert crossing over a natural or improved channel. Typical forms of scour include general degradation, local scour...

Industry Standards for Erosion Control Products�Future Tools for Civil Engineers
In 1990, the International Erosion Control Association (IECA) formed a Cooperative Standards Program (CSP), directed by the IECA Committee on Standards. The purpose of the CSP is to develop...

Channel Restoration of Incising, Mixed Grain Size Streams: Lessons Learned
Aquatic habitat restoration in incising sand and gravel bed streams disturbed by channelization and other human interventions has received little study. These channel systems are characterized...

Synchronized Measurements of Bed-Shear Stress and Flow Velocity in Open Channels with Simulated Vegetation
Synchronized measurements of shear stresses at the bed and velocities both within and above a simulated plant canopy in an open-channel flow are presented. Traditional (hot-film sensors)...

Mitigation Measures for Eroding Muddy Shores
A criterion for the stability of muddy coasts is proposed, accounting for bottom resistance, hydrodynarnic forcing and sediment supply. Although qualitative, this criterion provides a...

A Three Dimensional Oil Spill Model
This paper reports the development and testing of a comprehensive three-dimensional oil spill model. At present time, the model components include advection and turbulent diffusion, vertical...

Propeller Wash Induced Erosion at Quay Walls
The characteristics are examined of the sea bed erosion produced by the scouring action of a ship's propeller wash acting against a quay wall. The rate of development of erosion...

Fish Passage Pool Bedding Analysis
Anadromous fish passages, stream dynamics and the artifical channel segmented into a natural stream should fttnction seamlessly. This paper intends to develop reasonable procedures a designer...

Scour Protection in Bottomless Culverts
This paper will describe the relative severity of scour anticipated to occur at bottomless culverts and will provide some design guidance for scour protection based on research referenced...

Designing Concrete Culverts to Resist Scour Damage
Concrete culverts have been used for over 100 years. In this period, the main design concern centered on structural and hydraulic adequacy of the culvert. Scour is a relatively recent...

Study of Hydraulic Jump Lengths on Inclined Channel Beds
A hydraulic jump is generally used to dissipate kinetic energy of flow to protect man-made structures such as spillways, drop structures, and outlet works. It serves as a perfect location...

Adhesion Kinetics of Fuel Oil #6 and Oil-in-Water Emulsions on Marine Sediments under Turbulent Mixing Conditions
Oil spilled in the marine environment is subject to a great variety of physical, chemical and biological processes, which determine its ultimate fate in the aquatic environment. Many of...

Tensioned Fabric Structures
A Practical Introduction
The objective of this publication is to provide basic information about the nature and characteristics of tensioned fabric structures. Its target audience includes architects, engineers,...

Building an International Community of Structural Engineers
This proceedings, composed of two volumes, contains the papers presented at the American Society of Civil Engineers (ASCE) Fourteenth Structures Congress held in Chicago, Illinois, USA,...

Building Code Requirements for Masonry Structures (ACI 530-95/ ASCE 5-95/TMS 402-95); Specification for Masonry Structures (ACI 530.1-95/ ASCE 6-95/TMS 602-95); Commentary on Building Code Requirements for Masonry Structures (ACI 530-95/ ASCE 5-95/TMS 402-95); Commentary on Specification for Masonry Structures (ACI 530.1-95/ ASCE 6-95/TMS 602-95)
Copublished with American Concrete Institute (ACI) and The Masonry Society (TMS) Building Code Requirement for Masonry Structures,...

Engineering Mechanics
This proceedings contains keynote and summary papers presented at the 11th ASCE Engineering Mechanics Conference held in Fort Lauderdale, Florida, May 20-22, 1996. The keynote papers address...

 

 

 

 

Return to search